ClearOne XAP400 - Manual (Page 125)

119
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
Examples
#70 FILTER 1 M 3 2 200 On XAP 400 unit 0 (#70) the filter (FILTER) for mic
(M) channel 1, node 3 is set as a low-pass filter (2) at 200Hz.
#71 FILTER B P 2 4 3000 -10 On XAP 400 unit 1 (#71) the filter (FILTER) for
processing (P) channel B, node 2, is set as a low shelving (4) filter at 3000Hz and a
gain of -10dB.
#72 FILTER 3 M 2 6 5000 -15 1.00 On XAP 400 unit 2 (#72), the filter
(FILTER) for mic (M) channel 3, node 2, is set as a PEQ (6) with a center frequency
of 5000Hz, a bandwidth of 1.00, and a gain of -15dB.
#73 FILTER B P 2 7 4000 On XAP 400 unit 3 (#73), the filter (FILTER) for
processing (P) channel B, node 2, is set as a CD Horn (7) at a frequency of 4000Hz.
FILTSEL - Filter Select
This command turns on and off the filters on input and audio processing channels.
Command form: DEVICE FILTSEL [Value]
Argument details
Name Description
Device 0—7 or * to select all units
FILTSEL Command form
Channel See Groups and Channels, page 105
Group M = Mic Inputs, P = Processing Channels
Node 1-4, or * for all (selects mic input filter)
1-15, or * for all (selects processing channel filter)
Value 0 = Off, 1 = On, 2 = Toggle, Null to return current state
Example: #74 FILTSEL B P 2 1 On XAP 400 unit 4 (#74), the filter
(FILTSEL) on processing (P) channel B, node 2, is set to on (1).
FLOW - Flow Control
This command selects/reports the flow control of the serial port on the unit.
Hardware flow control is implemented using DTR and DSR.
Command form: DEVICE FLOW [Value]
Argument details
Name Description
Device 0—7 or * to select all units
FLOW Command form
Value 0 = Off, 1 = On, 2 = Toggle, Null to return current state
Example: #76 FLOW 1 On XAP 400 unit 6 (#76), the flow control (FLOW) to
the RS-232 port is set to on (1).