ClearOne XAP400 - Manual (Page 121)

115
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
COUNTRY — Country Selection
This command sets/reports the country for compliance.
Command form: DEVICE COUNTRY [Value]
Argument details
Name Description
Device 0—7 or * to select all units
COUNTRY Command form
Value 1 = US/Canada, 2 = Europe (CTR21), 3 = Mexico
4 = Australia, 5 = South Africa, 6 = Japan
7 = Brazil, Null to return current state
Example: #70 COUNTRY 1 On the XAP 400 unit 0 (#70), the country selection
(COUNTRY) is set to US/Canada (1).
DECAY - Decay Adjust
This command selects/reports the setting of the decay rate for a specified input.
Command form: DEVICE DECAY [Value]
Argument details
Name Description
Device 0—7 or * to select all units
DECAY Command form
Channel Range 1—4 (selects mic input)
Value 1 = Slow, 2 = Medium, 3 = Fast, Null to return current state
Example: #73 DECAY 1 3 On XAP 400 unit 3 (#73), the decay rate (DECAY)
for mic channel 1 is set to fast (3).
DELAY - Delay Adjust
This command selects/reports the delay time of each assignable processing channel.
Command form: DEVICE DELAY [Value]
Argument details
Name Description Units
Device 0—7 or * to select all units
DELAY Command form
Channel A—D (select processing channel)
Value 0.00 to 250 (selects delay) ms
Null to return current state
Example: #76 DELAY A 200 On XAP 400 unit 6 (#76) the delay (DELAY) for
processing channel A is set to 200ms.