ClearOne XAP400 - Manual (Page 122)

116
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
DELAYSEL - Delay Select
This command selects/reports the delay activation of an assignable processing
channel.
Command form: DEVICE DELAYSEL [Value]
Argument details
Name Description
Device 0—7 or * to select all units
DELAYSEL Command form
Channel A—D (select processing channel)
Value 0 = Off, 1 = On, 2 = Toggle, Null to return current state
Example: #74 DELAYSEL A 1 On XAP 400 unit 4 (#74) the delay
(DELAYSEL) within processing channel A is enabled (1).
DFLTM - Default Meter
This command selects/reports the setting of the default meter.
Command form: DEVICE DFLTM [Channel] [Group] [Position]
Argument details
Name Description
Device 0—7 or * to select all units
DFLTM Command form
Channel 1—8
Group I = Inputs, O = Outputs, M = Mic Inputs, L= Line Inputs
Position I, A, N, G, as applicable for group
(see Meter Type definitions, page 106)
Example: #75 DFLTM 8 O A On XAP 400 unit 5 (#75), the default meter
(DFLTM) is set to output (O) 8 after the gain adjustment (A).
DIAL — DTMF Dialing
This command dials a DTMF sequence or reports back the last sequence dialed.
Command form: DEVICE DIAL [Number]
Argument details
Name Description
Device 0—7 or * to select all units
DIAL Command form
Channel See Group and Channels, page 105
Number 1 — 40 Chars of 0—9, A—D, *, #, and , (comma)
Null to return last number dialed
Example: #70 DIAL 1 1,8002835936 XAP 400 unit 0 (#70) dials (DIAL) on
channel 1 the number 18002835936.