ClearOne XAP400 - Manual (Page 148)

142
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
SIGTOUT - Signal Generator Time Out
Sets the signal generator time out for the unit.
Command form: DEVICE SIGTOUT [Value]
Argument details
Name Description
Device 0—7 or * to select all units
SIGGEN Command
Value 0 = Off, 1—30 = Set time out minutes, Null = Current rate
Example: #57 SIGTOUT 15 On XAP 400 unit 7 (#77), the signal generator
time out (SIGTOUT) is set to 15 minutes.
SLVL - Speech Level Control Enable/Disable
This command selects/reports the setting of speech level control for a microphone.
Command form: DEVICE SLVL [Value]
Argument details
Name Description
Device 0—7 or * to select all units
SLVL Command
Channel 1—4 (select mic input)
Value 0 = Off, 1 = On, 2 = Toggle, Null = Current mode
Example: #70 SLVL 2 M 1 On XAP 400 unit 0 (#70), the speech leveler for
mic (M) channel 2 is set to on (1).
SPEEDDIAL - Speed Dialing
This command dials a speed dial number.
Command form: DEVICE SPEEDDIAL [Value]
Argument details
Name Description
Device 0—7 or * to select all units
SPEEDDIAL Command
Channel See Groups and Channels, page 105
Value 1 — 10, Null to query in text
Example: #71 SPEEDDIAL 15 On XAP 400 unit 1 (#71), SPEEDDIAL the
hybrid (1) with the number stored in location 5.