ClearOne XAP400 - Manual (Page 143)

137
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
RAMP — Ramp Gain Adjustment
This command starts/stops the gain ramp for an input, output, or assignable
processing block. There is no query for this command.
Command form: DEVICE RAMP [Target]
Argument details
Name Description Unit
Device 0—7 or * to select all units
RAMP Command
Channel See Groups and Channels, page 105
Group I, O, M, L, P, T, R (1, 2, 3, 5, 16, 17)
Rate -50 to 50 dB/s
If value = 0. the ramp will stop
If value < 0, the gain will ramp down
If value > 0, the gain will ramp up
Target -65 to 20 dB
If null in text, the ramp will use the
channel’s maximum and minimum for a target
Example: #77 RAMP 5 L 6 12 On XAP 400 unit 7 ( #77 ), the gain ( RAMP )
on L ine Input 5 will increase at a rate of 6d B/sec until the 12 dB point is
reached.
REDIAL — Dial the last number again
This command redials the last number. There is no query for this command.
Command form: DEVICE REDIAL
Argument details
Name Description
Device 0—7 or * to select all units
REDIAL Command
Channel See Groups and Channels, page 105
Example: #70 REDIAL 1 On XAP 400 unit 0 (#70), the hybrid (1) will
REDIAL the last phone number dialed.