ClearOne XAP400 - Manual (Page 141)

135
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
OFFA - Off Attenuation Mode
This command selects/reports the off attenuation mode of input channels 1—4.
Command form: DEVICE OFFA [Value]
Argument details
Name Description Units
Device 0—7 or * to select all units
OFFA Command
Channel 1—4 (select mic input)
Value 0—60 (select off attenuation level) dB
Null to return the current off attenuation level
Example: #76 OFFA 1 12 On XAP 400 unit 6 (#76), the off attenuation
(OFFA) for mic channel 1 is 12dB.
PAA - PA Adaptive Mode
This command selects/reports PA adaptive mode for the specified mixer. There can be
only one selection per mixer.
Command form: DEVICE PAA [Value]
Argument details
Name Description Units
Device 0—7 or * to select all units
PAA Command
Channel 1—4 (select mic input)
Value 0 = Off, 1 = On, 2 = Toggle, Null = Current mode
Example: #77 PAA 1 0 On XAP 400 unit 7 (#77), the PA adaptive mode (PAA)
on mic channel 1 is disabled (0).
PP - Phantom Power
This command selects/reports the setting of phantom power.
Command form: DEVICE PP [Value]
Argument details
Name Description Units
Device 0—7 or * to select all units
PP Command
Channel 1—4 (select mic input)
Value 0 = Off, 1 = On, 2 = Toggle, Null = Current mode
Example: #71 PP 2 1 On XAP 400 unit 1 (#71), the phantom power supply
(PP) for mic channel 2 is enabled (1).