ClearOne Converge Pro User Manual
Page 86
81
• Select the CONVERGE Pro Unit which contains the macro for muting.
• Select the Macro to turn on the mute.
• Select the Macro to turn off the mute.
Note:
If no macro is selected, all connected Beamforming Microphone Arrays will toggle the
mute when a Beamforming Microphone Array mute button is pressed.
• Set the Mute Mode LED to Off to turn off the LED’s on the Beamforming Microphone Array.
• Set the Mute Mode LED to Steady to turn the Beamforming Microphone Array’s LED to solid blue when
not muted and solid red when muted.
• Set the Mute Mode LED to Blinking to turn the Beamforming Microphone Array’s LED to solid blue when
not muted and blinking red when muted.
• Select the Show Beamforming Microphone Array warning to show a warning when a Beamforming
Microphone Array is added.
F
or additional information, refer to the Table of Contents for these related topics:
• LCD Programming Overview
• LCD Settings Menu
• Site File Overview
• Site Properties
• Connect To A Site
• Preset Mode Overview
• Controls & Connections
• Serial Control
• SNMP Control