ClearOne Converge Pro - Manual (Page 324)

319
CALL CONTROL SERIAL COMMANDS
CALLSTATUS – Report the Status of VoIP Channels
This command gives the status of the VoIP channels. This status can be queried, and will be sent
asynchronously. This command / status may NOT be set.
Command Form Details:
DEVICE CALLSTATUS [Status]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 26 (Z) -
Line
Number Unsigned Short 2 VoIP Line Number
-
Status Unsigned Short 4 Status for Channel
Status Definition:
-
0x0001 IDLE
0x0002 DIAL_TONE
0x0004 RING_BUSY
0x0008 CONNECTED
0x0010 LOCAL HOLD (LHOLD)
0x0020 REMOTE HOLD (RHOLD)
0x0040 LOCAL+REMOTE HOLD (LRHOLD)
0x0080 CONFERENCED
0x0100 CONFERENCED + LHOLD
0x0200 CONFERENCED + RHOLD
0x0400 CONFERENCED + LRHOLD
0x0800 INCOMING_CALL
0x0000 NO CALL STATUS
CONFCANCEL – Cancels a Conference Call Bridge
This command cancels the 3-Way conference initialization and terminates the call with the 3rd party. There is no
query for this command.
Command Form Details:
DEVICE CONFCANCEL
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 26 (Z) -
Reserved Unsigned Short 2 0 -
CONFCOMPLETE – Completes a Conference Call Bridge
This command bridges two calls into a 3-way call. There is no query for this command.
Command Form Details:
DEVICE CONFCOMPLETE
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 26 (Z) -
Reserved Unsigned Short 2 0 -