ClearOne Converge Pro - Manual (Page 321)

316
XHOOKD – Hook Flash Duration
This command selects/reports the hook flash duration. This command can be used to replace the HOOKD
command for the R group.
Command Form : DEVICE XHOOKD
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 50 – 2000
(Multiples of 10 Ms only)
(Null to query in text)
Ms
XLOCALNUM – Local Number
This command sets or reports back the current value of the local number. This command can be used to replace
the LOCALNUM command for the R group.
Command Form : DEVICE XLOCALNUM [Number]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 0 -
Number String 16 1 – 16 Chars of ‘0’ – ‘9’, ‘*’, ‘#’, ‘,’ -
XOFFA – Off Attenuation Mode
This command selects/reports the off attenuation value of a Mic channel. This command can be used to replace
the OFFA command for the M group.
Command Form : DEVICE XOFFA [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Float 2 0.00 – 60.00
(Null to query in text)
-
XPBDIAL – Dial a PB Entry by Name
This command dials a speed dial number by name. This command can be used to replace the PBDIAL command
for the R group. There is no query for this command.
Command Form : DEVICE XPBDIAL
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 0 -
Number String 16 1 – 16 Chars -
XREDIAL – Dial the last number again
This command redials the last number. This command can be used to replace the REDIAL command for the R
group. There is no query for this command.
Command Form : DEVICE XREDIAL
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 0 -