ClearOne Converge Pro - Manual (Page 304)

299
PHONEBOOKCNT – Counts Entries in the Phonebook
This command queries the number of entries in the phonebook. This command is query only.
Command Form : DEVICE PHONEBOOKCNT
Argument Type Size Values Units
Value Unsigned Integer 4 0 – 20 -
PHONEBOOKDEL – Deletes an Entry in the Phonebook
This command deletes an entry in the phonebook. There is no query for this command.
Command Form : DEVICE PHONEBOOKDEL
Argument Type Size Values Units
Label String 16 1 – 16 chars -
PHONEBOOKREAD – Queries the Phonebook by Index
This command queries an entry in the phonebook. This command is query only.
Command Form : DEVICE PHONEBOOKREAD [Speed Number Label]
Argument Type Size Values Units
Index Unsigned Integer 2 0 – 19 (Must be less than the Number of Phone
Book Entries)
-
Speed Dial Unsigned Integer 2 0 for not assigned to a speed dial
1 – 20
(NULL to query in text)
-
Number String 44 1 – 44 chars ‘0’ – ‘9’, ‘*’, ‘#’ -
Label String 16 1 – 16 chars -
PP – Phantom Power
This command selects/reports the setting of phantom power.
Command Form : DEVICE PP [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3 (M) -
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
PRESET – Preset Execution/Reporting
This command selects/reports the state of a preset.
Command Form : DEVICE PRESET [Value]
Argument Type Size Values Units
Channel Channel 1 0 (Binary)/Null (Text) = Query Last Preset Ran
See
Groups and Channels
-
Group Group 1 13 (S) -
Value Unsigned Integer 2 0 = Set preset state to off
1 = Set state to on and execute if not already on
2 = Execute and return state to off
(Null to query current state in text)
-