ClearOne Converge Pro - Manual (Page 280)

275
ENETDNSA – Ethernet DNS Server Address
This command selects/reports the DNS server IP address of the Ethernet port on the unit.
Command Form : DEVICE ENETDNSA [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text) -
ENETDNSA2 – Ethernet DNS Server Address 2
This command selects/reports the alternate DNS server IP address of the Ethernet port on the unit.
Command Form : DEVICE ENETDNSA2 [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text) -
ENETDOMAIN – Ethernet Domain Argument
This command selects/reports the Domain Argument of the Ethernet port on the unit.
Command Form : DEVICE ENETDOMAIN [Value]
Argument Type Size Values Units
Value String 64 (Null to query in text) -
ENETGATE – Ethernet Default Gateway Address
This command selects/reports the default gateway of the Ethernet port on the unit.
Command Form : DEVICE ENETGATE [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text) -
ENETSUBN – Ethernet Subnet Mask
This command selects/reports the Subnet mask of the Ethernet port on the unit.
Command Form : DEVICE ENETSUBN [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text) -
ENETVLAN – Enable VLAN Tagging
This command enables/disables VLAN tagging. Valid on VH20 ONLY. Change requires reboot to become
effective.
Command Form : DEVICE ENETVLAN [Value]
Argument Type Size Values Units
Value Unsigned
Integer 4 0 = VLAN Tagging Off
1 = VLAN Tagging On
2 = Toggle
(Null to query in text)
-
ENETVLANID – VLAN ID
This command set/reports VLAN Tag ID for all Ethernet packets (including SIP). Valid on VH20 ONLY. Change
requires reboot to become effective.
Command Form : DEVICE ENETVLANID [Value]
Argument Type Size Values Units
Value Unsigned
Integer 4 1 – 4094
(Null to query in text)
-