ClearOne Converge Pro - Manual (Page 49)

44
DEVICE IDS
Device IDs provide unique identifiers for all units that are linked together using the E-bus. After making Expansion
Bus connections, you must set a unique Device ID number for all units of the same Device Type on the E-bus.
Device Types and IDs
Device Types and Device IDs by model are as follows:
Model Device Type Device ID Range
880 1 0-B
TH20 2 0-F
VH20 E 0-F
840T 3 0-B
8i A 0-B
880T D 0-B
880TA H 0-B
SR1212 G 0-B
SR1212A I 0-B
Beamforming
Microphone
Array
N 0-F
NOTE : All models ship from the factory with a default DID of 0.
Assigning Device IDs
Use the following procedure to assign device IDs using the front panel controls:
1. Press the Select button on the front panel. The CONVERGE Menu appears.
CONVERGE MENU
Channels Settings
Presets Macros
2. Use the Menu Dial to highlight the Settings menu. Press the Select button. The Settings menu appears.
SETTINGS PAGE 1/2
RS232 Network
Default DID