ClearOne Converge Pro - Manual (Page 274)

269
CNETTXBNUM – CobraNet Tx Bundle Number
This command sets/reports the CobraNet Tx Bundle Number. Set to lowest value if bundle type is selected.
Command Form : DEVICE CNETTXBNUM [Value]
Argument Type Size Values Units
Transmitter Integer 4 1 – 4 Cobra Net Transmitter Number -
Value Integer 4 0 = Default
1 – 255 if Multicast
256 – 65535 if Unicast
(Null to query in text)
-
CNETTXDEPTH – CobraNet Tx Bundle Bit Depth
This command sets/reports the CobraNet Tx Bundle Bit Depth.
Command Form : DEVICE CNETTXDEPTH [Depth]
Argument Type Size Values Units
Transmitter Integer 4 1 – 4 Cobra Net Transmitter Number -
Depth Integer 4 16, 20, or 24 ONLY
(Default = 24)
(Null to query in text)
-
CNETTXLATENCY – CobraNet Tx Bundle Maximum Unicast
This command sets/reports the CobraNet Tx Bundle Maximum Unicast.
Command Form : DEVICE CNETTXLATENCY [Value]
Argument Type Size Values Units
Transmitter Integer 4 1 – 4 Cobra Net Transmitter Number -
Value Integer 4 0 = 5.33 ms (Default)
1 = 2.66 ms
2 = 1.33 ms
(Null to query in text)
-
CNETTXMAXUNI – CobraNet Tx Bundle Latency
This command sets/reports the CobraNet Tx Maximum Unicast.
Command Form : DEVICE CNETTXMAXUNI [Value]
Argument Type Size Values Units
Transmitter Integer 4 1 – 4 Cobra Net Transmitter Number -
Value Integer 4 1, 2, 3, or 4 ONLY
(Default = 1)
(Null to query in text)
-
CNETTXSTATUS – CobraNet Tx Bundle Status
This command reports the CobraNet Tx Bundle Status (audio presence). This command is Query ONLY and
may be sent asynchronously.
Command Form : DEVICE CNETTXSTATUS [Value]
Argument Type Size Values Units
Transmitter Integer 4 1 – 4 Cobra Net Transmitter Number -
Value Tx Status 4 0 = No Signal on Bundle
1 = Signal on Bundle
(Null to query in text)
Value