ClearOne Converge Pro - Manual (Page 307)

302
RESET – Reset
Resets the unit. There is no query for this command.
Command Form : DEVICE RESET
No Arguments
RING – Ring Indication
This command indicates a ringing line. This command is reportable only. It cannot be queried or set.
Command Form : DEVICE RING
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Value Unsigned
Integer 2 0 = Ring Cycle Ended
1 = Ring Cycle Started
-
RINGEREN – Audible Ring Enable
This command sends/reports the use of an audible ring.
Command Form : DEVICE RINGEREN [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
RINGERLVL – Audible Ring Level
This command selects/reports the audible ring’s level.
Command Form : DEVICE RINGERLVL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Value Signed Float 2 -12.00 – 12.00 (dB)
(Null to query in text)
-
RINGERSEL – Audible Ring Melody Selection
This command sends/reports the audible ring melody.
Command Form : DEVICE RINGERSEL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Value Unsigned Integer 2 1 – 3
(Null to query in text)
-
RINGERTEST – Audible Ring Melody Test
This command plays the current audible ringer melody. This command is executable only. There is no query.
Command Form : DEVICE RINGERTEST
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Reserved Unsigned Integer 2 0 -