ClearOne Converge Pro - Manual (Page 325)

320
CONFSTART – Initiates a 3-Way Conference Call
This command dials a 3 rd party to initiate a bridged (conferenced) call.
Command Form Details:
DEVICE CONFSTART [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 26 (Z) -
Reserved Unsigned Short 2 0 -
Value String 45 1 – 44 Characters of ‘0’ – ‘9’, ‘*’, ‘#’ and ‘,’ plus
NULL
(Null to query in text)
-
HOLD – Places a Call on Hold
This command places the current call on hold. State tracking is provided by the CALLSTATUS command.
Command Form Details:
DEVICE HOLD
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 26 (Z) -
MULTILNEN – VoIP Multi-Line Enable
This command sets/reports an environmental variable which selects if the VoIP operates in single-line mode or
multi-line mode. This command requires a reboot of the unit to take effect. The current state of operation of the
unit can be queried using the MULTILNSTAT command.
Command Form Details:
DEVICE MULTILNEN [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 26 (Z) -
Value Unsigned Short 2 0 = Single Line
1 = Multi-Line
2 = Toggle
(NULL to Query in Text)
-
MULTILNSTAT – VoIP Multi-Line Status
This command reports the current mode of operation of the VoIP interface. The current state of operation is set
once on boot up. To change the state of operation (single/multi) line, use the MULTILNEN command and reboot
the unit. This command is query only.
Command Form Details:
DEVICE MULTILNSTAT [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels -
Group Group 1 26 (Z) -
Value Unsigned Short 2 0 = Single Line
1 = Multi-Line
(NULL to Query in Text)
-