ClearOne Converge Pro User Manual

Page 100

Feedback Eliminator Settings:

• Filter Settings: Filters are applied according to the specifications the user sets.

Number of Fixed Filters: Up to 16 Fixed Filters are applied. If the specified
number of filters are not required, they become Dynamic Filters.

Filter Bandwidth: Bandwidth is determined by the specified Q factor. A lower Q creates a
filter that works across a wider frequency range. A higher Q utilizes a narrower range.

Filter Depth Mode:

• Locked re-uses filters. A replacement filter, with new settings and increased filter depth is

applied in place of an existing filter.

• Unlocked adds a new filter at a specific frequency. No filters are replaced, so this setting

will count against the total number of filters available.

Mode Settings: Voice and Music presets are available to fine-tune the feedback eliminator.

NOTE: Voice Mode is the more aggressive setting.

Enable Ringing Elimination: Allows the Feedback Cancellation to attempt to suppress
ringing.

NOTE: This setting adjusts slowly to eliminate ringing.

Click Close to close the window once the Setup Complete indicator has switched from yellow (in
process) to green (setup complete).