ClearOne Converge Pro - Manual (Page 323)

318
XSLVL – Speech Level Control
This command selects/reports the setting of Speech Level Control. This command can be used to replace the
SLVL command for the M group.
Command Form : DEVICE XSLVL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
XSPEEDDIAL – Speed Dialing
This command dials a speed dial number. This command can be used to replace the SPEEDDIAL command for
the R group.
Command Form : DEVICE XSPEEDDIAL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Value Unsigned Short 2 1 – 20
(Null to query in text)
-
XTE – Telco Enable
This command selects/reports the hook status. This command can be used to replace the TE command for the R
group.
Command Form : DEVICE XTE [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-