ClearOne Converge Pro - Manual (Page 270)

265
BFMUTEMACRO – Define Macros that Run When Beamforming Mic Mute Button Is Pressed
Define which macros to run on which CONVERGEPro board to Mute and Un-Mute groups of Beamforming Mics
when the specified Beamforming Mic’s Mute button is pressed. This allows pressing a single button to Mute or
Un-Mute multiple Beamforming Mics. If the Macro numbers are zero (default) then ALL Beam Former Mics in the
system will be Muted or Un-Muted.
Command Form : DEVICE BFMUTEMACRO [Type ID] [Device ID] [ Mute On Macro] [Mute Off Macro]
Argument Type Size Values Units
Type ID Integer 1 Type ID of board where the Mute On and Mute Off
Macros are defined (Null to Query in text)
-
Device ID Integer 1 Device ID of board where the Mute On and Mute Off
Macros are defined
-
Mute On
Macro Integer 1 See 14(C) in Groups and Channels
-
Mute Off
Macro Integer 1 See 14(C) in Groups and Channels
-
BFLED – Beamforming Mic LED Mode
This command sets/reports the mode of the Mute Button LEDs on a Beamforming Mic.
Command Form : DEVICE BFLED [Value]
Argument Type Size Values Units
Value Integer 4 0 = OFF (Always not lit)
1 = Steady Red when Muted –
Steady Blue when Un-Muted (Default)
2 = Blinking Red when Muted –
Steady Blue when Un-Muted
(Null to Query in text)
-
CALLDUR – Call Duration
This command returns current call duration. If no call is active, this command returns 0. At the time of call
termination, this command will automatically be sent out to report call duration. This command is read only.
Command Form : DEVICE CALLDUR
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Reserved 2 0 -
Duration String 8 String of format HR:MN:SS -
CALLERID – Reports Caller ID Information
This command reports Caller Identification Information. This command is reportable only. It cannot be
queried or set.
Command Form : DEVICE CALLERID
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Reserved Unsigned Integer 2 0 -
Number String 16 1 – 16 chars -
Label String 16 1 – 16 chars -