ClearOne Converge Pro - Manual (Page 263)

258
ACONNLVL – Audible Connect / Disconnect Level
This command selects/reports the audible connect / disconnect indicator’s level.
Command Form : DEVICE ACONNLVL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Value Signed Float 2 -12.00 – 12.00
(Null to query in text)
dB
AD – Auto Disconnect Enable / Disable
This command selects/reports the setting of auto disconnect.
Command Form : DEVICE AD [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Value Unsigned Integer 2 0 = Off
1 = Loop Drop
2 = Call Progress
3 = Loop Drop + Call Progress
(Null to query in text)
-
ADCLIP – Audio Clipping
This command reports the channels that are currently clipping their audio signals. This command is read only.
This command is implemented only for inputs.
Command Form : DEVICE ADCLIP [Values]
Argument Type Size Values
Value Bit Map of
Inputs 2 XXXX XXXX XXXX XXXX
|……………………| Input 1 (lsb) to 12 (msb)
|…….| Reserved
(Null to query in text)
Bit Map of
Outputs 2 XXXX XXXX XXXX XXXX
|………………………| Output 1 (lsb) to 13 (msb)
|….| Reserved
Bit Map of
Processors 2 XXXX XXXX XXXX XXXX
|……………| Processor A (lsb) to H (msb)
|--------------| Reserved
Bit Map of
Faders 1 XXXX XXXX
|------| Faders 1 (lsb) to 4 (msb)
|-------| Reserved
Bit Map of Telco 1 XXXX XXXX
| Telco RX
| Telco TX
|-----------| Reserved