ClearOne Converge Pro User Manual
Page 284
279
FESC – Feedback Elimination Setup Complete
This command reports when the automatic feedback eliminator setup training cycle is in progress. The training
cycle is started using the command FES (Feedback Elimination Setup). This is a query only command.
Command Form
: DEVICE FESC
Argument Type
Size
Values
Units
Channel
Channel
1
See GroupAndChannels
-
Group
Group
1
23 (J)
-
Value
Unsigned Short
2
0 = Setup Complete
1 = Setup in Progress
(Sent Null, Value Returned)
-
FILTER – Filter Adjust
This command selects/reports the settings of a filter.
Command Form
: DEVICE FILTER
Subtype]
Argument
Type
Size
Values
Units
Channel
Channel
1
See
Groups and Channels
-
Group
Group
1
3, 5, 23, 29 (M, P, J, V)
-
Node
Unsigned
Integer
1
Group 3, 23, 29
1 – 4
-
Group 5
1 – 15
Type
Unsigned
Integer
1
0 = None
1 = All Pass
2 = Low Pass
3 = High Pass
4 = Low Shelving
5 = High Shelving
6 = Parametric Equalizer
7 = CD Horn
8 = Bessel Crossover
9 = Butterworth Crossover
10 = Linkwitz-Riley Crossover
11 = Notch
(Null to query in text)
-
Frequency
Unsigned
Float
4
Type 0
0 (Null in text)
Hz
Type 1 – 6, 8 – 11
20.00 – 20000.00
Type 7
500.00 – 5000.00
Gain/Slope
Signed Float 2
Type 0 – 3, 7, 11
0 (Null in text)
dB /
dB per
Octave
Type 4 – 6
-15.00 – 15.00
Type 8 – 9
12, 18, 24
Type 10
12, 24
Bandwidth/Subtype Unsigned
Float
2
Type 0 – 5, 7
0 (Null in text)
Octaves /
Type
Type 6, 11
0.05 – 5.00
Type 8 – 10
2 = Low Pass
3 = High Pass