ClearOne Converge Pro User Manual
Page 70
65
CONNECT TO A SITE
Connect To a Site
Click the Connect button
on the Console Button Bar, or select Connect from the Connect Menu. The
Connect dialog appears as shown below.
Connection options include:
• To automatically create a new site file, select the Create New Document and Connect to Site radio button
• To pull data from the unit to the current Site File, select the Pull Data from Unit to Current Document radio
button (only available if a site file is open)
• To push data from the current site file to the unit, select the Connect to Site and Push Document radio
button (only available if a site file is open the unit is added)
• To connect via USB, select the USB Connection radio button
• To connect via IP, select the IP Connection radio button, and select a unit from the Available Addresses
drop-down list (or enter an IP address in the Enter Address entry box)
Press the Connect button to connect to the site or Cancel to close the dialog.
NOTE: The default login user name is ClearOne. The default password is CONVERGE. User
names and passwords are not case sensitive.
Disconnect from a Site
To disconnect from a site, press the Disconnect button
on the Console Button Bar, or select Disconnect from
the Connect menu. Answer Yes to the Confirm dialog that appears, or No to cancel.