ClearOne Converge Pro - Manual (Page 319)

314
XDELAYSEL – Audio Delay Enable
This command enables signal delay on a Channel. This command can be used to replace the DELAYSEL
command for the P group.
Command Form : DEVICE XDELAYSEL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 5, 23 (P, J) -
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
XDIAL – DTMF Dialing
This command dials a DTMF sequence or reports back the last sequence dialed. This command can be used to
replace the DIAL command for the R group.
Command Form : DEVICE XDIAL [Number]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Reserved Unsigned Short 2 0 -
Number String 44 1 – 44 Chars of ‘0’ – ‘9’, ‘*’, ‘#’, ‘,’
(Null to query in text)
-
XDTMFLVL – DTMF Tone Level
This command selects/reports the DTMF tone’s level. This command can be used to replace the DTMFLVL
command for the R group. You can’t change level during a call.
Command Form : DEVICE XDTMFLVL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Value Signed Short 2 -12.00 – 12.00
(Null to query in text)
dB
XDTONELVL – Dial Tone Level
This command selects/reports the audible dial tone’s level. This command can be used to replace the DTONELVL
command for the R group. You can’t change level during a call.
Command Form : DEVICE XDTONELVL [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17, 26 (R, Z) -
Value Signed Short 2 -12.00 – 12.00
(Null to query in text)
dB
XGHOLD – Gate Hold Time Adjust
This command selects/reports the setting of hold time. This command can be used to replace the GHOLD
command for the M group.
Command Form : DEVICE XGHOLD [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 3, 29 (M, V) -
Value Unsigned Short 2 0.10 – 8.00
(Null to query in text)
S