ClearOne Converge Pro - Manual (Page 266)

261
AVBLINK – AVB Link Status
This command reports the Link status of the CONNECT AVB Bridge. This command is Query ONLY and may
be sent asynchronously.
Command Form : DEVICE AVBLINK [VALUE]
Argument Type Size Values Units
Value Integer 4 0 = No Link
1 = Link
(Null to query in text)
-
AVBNUMRX – Number of AVB Listeners
This command reports the CONNECT AVB Bridge Number of Listeners.
Command Form : DEVICE AVBNUMRX [VALUE]
Argument Type Size Values Units
Link Integer 4 0 – 4
(Null to query in text)
Value
AVBMAC – AVB Bridge Board MAC Address
This command reports the MAC Address of the CONNECT AVB Bridge board. This command is Query ONLY.
Command Form : DEVICE AVBMAC [VALUE]
Argument Type Size Values Units
Value String 20 “xx:xx:xx:xx:xx:xx”
NULL terminated MAC address
-
AVBNUMTX – Number of AVB Talkers
This command reports the CONNECT AVB Bridge Number of Talkers.
Command Form : DEVICE AVBNUMTX [VALUE]
Argument Type Size Values Units
Link Integer 4 0 – 4
(Null to query in text)
Value
AVBRESET – AVB Reset
Resets the AVB connection and processor. There is no query for this command.
Command Form : DEVICE AVBRESET
Command Form : N/A
AVBRXSTATE – State Register of the specified AVB Listener
This command reports the State Register of the specified CONNECT AVB Listener. This command is Query
ONLY and may be sent asynchronously.
Command Form : DEVICE AVBRXSTATE [LISTENER] [VALUE]
Argument Type Size Values Units
Listener Integer 4 1 – 4 Listener Number -
Value Hexadecimal 4 0x00 – The Listener is disabled and will not
receive.
0x01 – The Listener is enabled and will receive if
a talker provides it.
0x02 – The Listener is enabled and receiving.
0x03 – 0xFFFFFFFF (Reserved)
(Null to query in text)
-