ClearOne Converge Pro - Manual (Page 159)

154
PROCESSING SETTINGS
Processing Settings enable you to configure filters, delay, compression, and gain to create precise audio
configurations for any venue. There are four processing blocks available for the 840T (A-D), and eight for the 880,
880T, 880TA, 8i, SR 1212 (A-H) and SR 1212A (A-H).
Accessing Processing Settings
With the Channel tab selected on the Tab Bar, select the desired processing block on the Tree View tab in the
Site Pane.
The center pane displays a signal processing diagram, meters, and configuration controls for selected processing
block as shown above.
The meters and configuration controls for processing blocks are explained in the following sections.
Channel Label
Rename the channel by entering a name in the Label entry field (optional). Label changes are global, and appear
throughout Console wherever the label is referenced.