ClearOne Converge Pro - Manual (Page 275)

270
CNETVER – CobraNet Tx Board F/W Version
This command reports the firmware version of the CobraNet board. This command is Query ONLY.
Command Form : DEVICE CNETVER [Value]
Argument Type Size Values Units
CNetVersion String 12 Version format “MM.mm.rr.ee”
(NULL terminated –
Major.Minor.Revision.Enineering)
-
COMPDLY – Compressor Delay
This command sets signal compression delay on a Channel for look ahead compression functionality. Delay from
0-20 msec.
Command Form : DEVICE COMPDLY [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 23 (J) -
Value Unsigned Integer 2 0 - 20
(Null to query in text)
msec
COMPDLYEN – Compressor Delay Enable
This command enables signal compression delay on a Channel for look-ahead compression functionality
Command Form : DEVICE COMPDLYEN [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 23 (J) -
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
COMPERSIST – CobraNet Persistence
This command sets/reports the CobraNet Persistence for the CONNECT CobraNet board.
Command Form : DEVICE COMPERSIST [Value]
Argument Type Size Values Units
Value Integer 4 0 - 255 (Default = 32)
(Null to query in text)
-
COMPRESS – Compressor Adjust
This command selects/reports the settings of the compressor.
Command Form : DEVICE COMPRESS [Threshold Ratio Attack Release Gain]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 5 (P) -
Threshold Signed Integer 1 -60 – 20
(Null to query in text)
dB
Ratio Unsigned Integer 1 1 – 20
Attack Unsigned Float 2 0.00 – 100.00 Ms
Release Unsigned Integer 2 100 – 2000 Ms
Gain Unsigned Float 4 0.00 – 20.00 dB