ClearOne Impress IM100 User Manual - Manual (Page 66)

64 t
EChnICal
S
UPPORt
: 800.283.5936
Source Select: The 4 video input connectors on the back of the IMPRESS are listed here. Select
the one that has the source attached that you wish to display.
V
IDEO
P
agES
Video sources can be passed through the IMPRESS full-screen as well and be displayed with other
elements such as a overlay regions and logo graphics fully integrated.
To add a video page, simply click on the Append Page button and select RT Video Overlay as
the page type. Provide a description, and click on OK. The page properties window for the new
page will be brought up automatically.
» NOTE: There is no page editor for Video Overlay pages. No text or graphics can be
inserted on the page aside from overlay regions or a project-wide logo.
Go to the Audio/Video tab and select the Video Input that corresponds to the physical connector
on the rear of the IMPRESS that the video source is connected to.
You may wish to adjust audio settings as well, if the video passing through has an accompanying
audio track. See the section on Audio later in this chapter.
O
VERlay
R
EgIOnS
The IMPRESS system has the capability to display continuous messages that are superimposed
over all (or most) pages in a project. These are referred to as “Overlay Regions.”
Overlay messages can crawl from right to left, or be centered on the screen for a fixed amount of
time. They can be text, date and time, or weather variables.
To access the overlay regions, click on the Project Properties button and then select the Overlay
Regions tab.