Using the impress source – ClearOne Impress IM100 User Manual User Manual

Page 20

Text mode
Original mode

EChnICal

UPPORt

: 800.283.5936

USING THE IMPRESS SOURCE

Now the IMPRESS is a source within the StreamNet network, it can be selected via a TouchLinX
controller for display. Furthermore, if the IMPRESS has had multiple projects published to it, these
projects can be individually selected for display.

The following example shows “IMPRESS” highlighted to be selected on the control:

2. Enter the IMPRESS IP Address and the IMPRESS Password (if used) of the IMPRESS unit.

See “Set Password” in the “IMPRESS Composer Setup, Completing Site Setup” section of this
guide for more information.

3. Save the changes and exit the program