ClearOne Impress IM100 User Manual - Manual (Page 14)

12 t
EChnICal
S
UPPORt
: 800.283.5936
» NOTE: When you create pages on your PC, you can set starting and ending dates
and times, therefore it is very important that the date and time on the playback system
are set accurately to assure proper playback.
Press the right arrow key to highlight the first ‘Date’ field.
Use the up and down arrow buttons to change the value of a field, and use the left and right arrow
buttons to move between fields.
The format is YEAR – MONTH – DAY.
Once you have adjusted the numbers to reflect the current date, press Select to move down to the
first ‘Time’ field.
Use the left and right arrow keys to select which number you wish to modify, and use the up and
down arrow keys to change the value of that number.
The format is HOUR – MINUTES – SECONDS.
» NOTE: This menu uses 24-hour notation, meaning that hours range from 00 to 23
instead of the usual 1-12 AM/PM. For example, Midnight is 00:00, 8 AM is 08:00,
Noon is 12:00, 1 PM is 13:00 and 11 PM is 23:00.
Use the up and down arrow buttons to highlight the desired time zone, and press the Select key
to highlight “Set” and press the Select key again to confirm the settings.
Press the right arrow key and select to return to the main menu.
n
EtwORK
S
EttIngS
M
EnU
All IMPRESS units feature built-in support for Ethernet networking.
» NOTE: Ethernet networking can be a complex subject. If you are not familiar with
the meaning and implementation of terms like “IP Address, “TCP/IP”and “Subnet
Mask,” then we recommend you have your network administrator assist you with
these menus. ClearOne can assist with the diagnosis of network-related problems,
but cannot advise on how to configure the IMPRESS system for installation on a
specific network.