5 833 ic liquid handling suppressor unit, 1 connection of the suppressor module, 833 ic liquid handling suppressor unit – Metrohm 833 IC Liquid Handling Unit User Manual

Page 39: Connection of the suppressor module, Fig. 9, Suppressor module 1.753.0100, Sect. 5

5.1 Connection of the Suppressor module

833 IC Liquid Handling Unit / Instructions for Use 8.833.1003

5 833 IC Liquid

Handling
Suppressor Unit

This instrument version can be used for retrofitting a 2.820.0X20 IC

Separation Center with two injectors or a 2.761.0010 Compact IC for

chemical suppression in an easy way. It consists of the 833 IC Liquid

Handling Unit basic instrument and the 1.753.0100 Metrohm

Suppressor Module MSM.

24 Suppressor module

25 Suppressor connection

with permanently attached inlet

and outlet capillaries

26 Connection cable

connection cable to 833 IC Liquid

Handling Unit

Fig. 9:

Suppressor module 1.753.0100

5.1

Connection of the Suppressor module

The 1.753.0100 Suppressor module must first be inserted in the

2.820.0X20 IC Separation Center and connected to the 833 IC Liquid

Handling Unit. Connections are then made to the inlet and outlet

capillaries mounted on the suppressor. Proceed as follows (underlined

numbers ## refer to parts and controls in the 819/820 Instructions for

Use):

1 Insert suppressor module

•

820.0X20 IC Separation Center (2-channel system):

Place suppressor module 24 inside the chamber on the floor,

see Fig. 24, 819/820 Instructions for Use).