Metrohm 833 IC Liquid Handling Unit - Manual (Page 25)

3.1 Electrical connection
833 IC Liquid Handling Unit / Instructions for Use 8.833.1003
17
• 6.2143.220 Cable for three remote connections via
Remote lines 1, 2 and 4.
To connect up to three Liquid Handling Units, e.g. for dialysis with
suppression:
2x 2.833.0010 IC Liquid Handling Pump Unit
and 1x 2.833.0040 IC Liquid Handling Dialysis Unit
(three peristaltic pumps are switched on and off)
or
Ultrafiltration with suppression
1x 2.833.0020 IC Liquid Handling Suppressor Unit
and 1x 2.833.0050 IC Liquid Handling Ultrafiltration Unit
(two peristaltic pumps are switched on and off
and the sample preparation module is switched
on)
The remote line via which the control of the Liquid Handling Unit takes
place is determined by the wiring of the cable. The active remote line is
printed on the 833-end of the cable. This remote line must be set
accordingly in the control software «IC Net», see Section 6.4.3 of the
«
IC Net» Instructions for Use.