Metrohm 833 IC Liquid Handling Unit - Manual (Page 117)

10.5 Warranty and Conformity
830 IC Interface / Gebrauchsanweisung 8.830.1001
109
10.5.2 Declaration of Conformity
This is to certify the conformity to the standard
specifications for electrical appliances and accessories,
as well as to the standard specifications for security and
to system validation issued by the manufacturing
company. CH-9101 Herisau, Switzerland
Tel. +41 71 353 85 85
Fax +41 71 353 89 01
www.metrohm.com
Name of commodity 833 IC Liquid Handling Unit
Name of manufacturer Metrohm Ltd., Herisau, Switzerland
Description
Remote controlled two-channel peristaltic pump, versions available with additional
modules for chemical suppression, sample preparation, dialysis or filtration.
This Metrohm instrument has been built and has undergone final type testing according to the
standards:
Electromagnetic compatibility: Emission
EN/IEC 61326, EN 55022 / CISPR 22, IEC 61000-3-2
Electromagnetic compatibility: Immunity
EN/IEC 61326, EN/IEC 61000-4-2, EN/IEC 61000-4-3, EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC
61000-4-6, EN/IEC 61000-4-11, EN/IEC 61000-4-14, NAMUR
Safety specifications
EN/IEC 61010-1, UL 3101-1 protection class I
It has also been certified by ElectroSuisse, which is member of the International Certification Body
(CB/IEC).
The instrument meets the requirements of the CE mark as contained in the EU directives 89/336/EEC
and 73/23/EEC and fulfils the following specifications:
EN 61326 Electrical equipment for measurement, control and laboratory use – EMC requirements
EN 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory
use
Metrohm Ltd. is holder of the SQS-certificate of the quality system ISO 9001 for quality assurance in
design/development, production, installation and servicing.
The system software, stored in Read Only Memories (ROMs) has been validated in connection
with standard operating procedures in respect to functionality and performance.
The technical specifications are documented in the instruction manual.
Herisau, May 28, 2003
Dr. J. Frank Ch. Buchmann
Development Manager Production and
Quality Assurance Manager