Rockwell Automation 8520-9API 9/Series OCI API Developer's Guide - Manual (Page 89)

4–41 OCI Data Server Data Items
Publication 8520-6.6 - August 1999
FW_REVISION
Data Type
DINT
Read/Write Read only
Array Index none
Control Type Lathe/Mill/Grinder 1
1 Grinder Control Type is not available for Release 1 of 9/PC.
This double word provides the revision of the system executive as a
32 bit word. The upper 16 bits indicate the major and minor
revisions. The lower 16 bits indicate the an internal Allen–Bradley
software revision that you should ignore.
For example for firmware revision 11.00 you would be returned the
decimal integer 720896048 or in HEX
2AF8–0030
The lower 16 bits is the internal revision
The upper 16 bits is the major revision 11000 (11.00)
PROCESS_NAMES
Data Type
String
Read/Write Read only
Array Index none
Control Type Lathe/Mill (dual process only)
The PROCESS_NAMES data item identifies AMP process name for
dual process systems. The system installer configures a process
name in AMP for each process controlled by the CNC. This item
returns the process name as a text string for the requested process.
Important: Dual process systems are not available for release 1 of
the 9/PC.
Follow the data item with a .1 or .2 to indicate the process number.
No process number makes a request for process 1. Single process
systems can also use .1 as a valid data item request. For example:
PROCESS_NAMES.1
would return the text string used to identify the process 1 name.