Rockwell Automation 8520-9API 9/Series OCI API Developer's Guide - Manual (Page 154)

5–43 OCI Data Server CNC Commands
Publication 8520-6.6 - August 1999
DEACTIVATE_PART_PROGRAM (no argument)
Use this command to deactivate the currently active part program.
No arguments are required with this command. For example:
[DEACTIVATE_PART_PROGRAM]
would deactivate the part program currently active on the control.
DELETE_PART_PROGRAM (filename_string")
This command deletes the part program from the control or OCI
station. The filename string format is given on page 6–19 and
includes specific directory information. For example:
[DELETE_PART_PROGRAM (“MAIND :DSTIN.PPG ”)]
would delete the part program DSTIN located in the controls main
directory.
ENTER_PART_PROGRAM_SEARCH_MODE (search_type)
Use this command to access part program search mode. The
search_type argument is an enumeration that identifies the type of
search operation the control is to perform.
The enumerations are as follows:
Enumeration Result:
1 NĆSearch
2 OĆSearch
3 EOB Search
4 Slew Search
5 String Search
For example:
[ENTER_PART_PROGRAM_SEARCH_MODE (1)]
readies the control to perform an N word search. Exit search mode
using the command [EXECUTE_PART_PROGRAM_SEARCH(5)].