Rockwell Automation 8520-9API 9/Series OCI API Developer's Guide - Manual (Page 199)

OCI Data Items A–11
Publication 8520-6.6. - August 1999
Control Type Req Dual
Proc.
Units
Dependency
Units Array Indices Num
Indices
OCI/9/PC Data Type Description Item (Name)
193 MEMORY_DUMP_DATA Memory dump data
(debug monitor)
INT [ ] OCI 1 MEM_DUMP_SIZE No R All Controls
198 NUM_RING_DEVICES Number of I/O ring devices configured INT OCI No R All Controls
190 PAL_REVISION PAL Symbols Revision
(debug monitor)
DINT OCI 0 No R All Controls
191 PALLOC_FREE_SPACE Available Pool Memory
(debug monitor)
DINT Both 0 Bytes No R All Controls
296 REMOTE_INPUT_DATA Remote I/O input data ($RMI1,8) INT [ ] OCI 1 MAX_REMOTE_IO No R All Controls
297 REMOTE_OUTPUT_DATA Remote I/O output data ($RMO1,8) INT [ ] OCI 1 MAX_REMOTE_IO No R All Controls
304 RING_IO_CARD_TYPE Output data from the ring device at the requested
position
USINT [ ] [ ] OCI 1 MAX_NUMBER_RING_DEVICES No R All Controls
301 RING_IO_DEVICE_ADDRESS Device address on the ring at the requested
position
USINT [ ] OCI 1 MAX_NUMBER_RING_DEVICES No R All Controls
302 RING_IO_DEVICE_INPUT_DATA Input data from the ring device at the requested
position
USINT [ ] OCI 1 MAX_NUMBER_RING_DEVICES No R All Controls
303 RING_IO_DEVICE_OUTPUT_ DATA Output data from the ring device at the requested
position
USINT [ ] OCI 1 MAX_NUMBER_RING_DEVICES No R All Controls
300 RING_IO_DEVICE_TYPE Device type on the ring at the requested position USINT [ ] OCI 1 MAX_NUMBER_RING_DEVICES No R All Controls
356 FINE_SCAN_TIME_AVG Average scan time for secondary interpolation UINT 9/PC 0 No R All Controls
357 FINE_SCAN_TIME_MAX Maximum scan time for secondary interpolaĆ
tion
UINT 9/PC 0 No R All Controls
358 BLOCK_CYCLE_TIME Average block activation interval UINT 9/PC 0 No R All Controls
359 BLOCK_CYCLE_TIME_MAX Maximum block activation interval UINT 9/PC 0 No R All Controls
360 FOREGROUND_LOGIC_TIME Average foreground logic execution interval UINT 9/PC 0 No R All Controls
361 FOREGROUND_LOGIC_TIME_MAX Maximum foreground logic execution interval UINT 9/PC 0 No R All Controls
362 AMPED_FINE_SCAN_TIME AMPed secondary interpolation rate UINT 9/PC 0 No R All Controls
363 COARSE_SCAN_TIME AMPed and computed primary interpolation
rate
UINT 9/PC 0 No R All Controls
n Paramacro Items
SP.....................
Paramacro Parameters by their # numbers LREAL [ ] Both Yes R/W All Controls
113 COM2A_PARAMETER_NAMES Com 2A Parameters Names STRING1 [ ] Both 1 NUM_COM2A_PAĆ
RAMS
Yes R/W All Controls
o Part Program Directory Items
42 ACTIVE_PART_PROGRAM Active Program Name STRING1 Both 0 Yes R All Controls
43 ACTIVE_SUB_PROGRAM Active Sub-program Name STRING1 Both 0 Yes R All Controls