Rockwell Automation 1768-L45S Compact GuardLogix Controllers User Manual
Page 43
Rockwell Automation Publication 1768-UM002C-EN-P - April 2012
43
Communicate over Networks
Chapter 4
3.
Double-click the first safety I/O module to view the General tab.
4.
Click
to the right of the safety network number to open the Safety
Network Number dialog box.
5.
Choose Time-based and click Generate to generate a new SNN for that
EtherNet/IP network.
6.
Click OK.
7.
Click Copy to copy the new SNN to the Windows Clipboard.
8.
Open the General Tab of the Module Properties dialog box of the next
safety I/O module under that EtherNet/IP module.
9.
Click
to the right of the safety network number to open the Safety
Network Number dialog box.
10.
Choose Time-based and click Paste to paste that EtherNet/IP network’s
SNN into that device.
11.
Click OK.
12.
Repeat steps
8
…
10
for the remaining safety I/O modules under that
EtherNet/IP communication module.
13.
Repeat steps
2
…
10
for any remaining network communication modules
under the I/O Configuration tree.