Programming requirements – Rockwell Automation 1768-L45S Compact GuardLogix Controllers User Manual
Page 15

Rockwell Automation Publication 1768-UM002C-EN-P - April 2012
15
System Overview
Chapter 1
Use these communication modules to provide an interface between Compact
GuardLogix controllers and network devices.
The Compact GuardLogix controller can connect to RSLogix 5000
programming software via a serial connection, an 1768-ENBT EtherNet module,
or a 1768-CNB ControlNet module.
See the
Additional Resources on page 9
for more information on using network
communication modules.
Programming Requirements
RSLogix 5000 software is the programming tool for Compact GuardLogix
controller applications.
Use
to identify the minimum software versions for use with your
Compact GuardLogix controllers.
Safety routines include safety instructions, which are a subset of the standard
ladder logic instruction set, and safety application instructions. Programs
scheduled under the safety task support only ladder logic.
Use this module
To interface between
1768-ENBT, series A, revision 3
(1)
(1) This or later.
The Compact GuardLogix controller and EtherNet/IP devices
1768-CNB, series A, revision 3
(1)
Controllers on the ControlNet network
Table 2 - Software Versions
Cat. No.
RSLogix 5000 Software
Version
(1)
(1) This version or later.
RSLinx
®
Classic Software
Version
1756-L43S, 1756-L45S
18
Any version
(2)
(2) RSLinx Classic version 2.59 or later is required with RSLogix 5000 software version 20 or later.