beautypg.com

Understanding terminology – Rockwell Automation 1768-L45S Compact GuardLogix Controllers User Manual

Page 10

background image

10

Rockwell Automation Publication 1768-UM002C-EN-P - April 2012

Preface

You can view or download publications at

http://www.rockwellautomation.com/literature

. To order paper copies of

technical documentation, contact your local Allen-Bradley® distributor or
Rockwell Automation sales representative.

Understanding Terminology

This table defines terms used in this manual.

Logix5000 Controllers Execution Time and Memory Use Reference
Manual, publication

1756-RM087

Provides information on estimating the execution time and memory use for instructions

Logix5000 Controllers Import Export Reference Manual, publication

1756-RM084

Provides information on using RSLogix

5000 Import/Export utility

PhaseManager User Manual, publication

LOGIX-UM001

Provides information on programming the controller to use equipment phases in a standard application

SERCOS and Analog Motion Configuration and Startup Manual,
publication

MOTION-UM001

Provides information on configuring the controller for motion axes, coordinate system, and motion modules in
standard applications

Industrial Automation Wiring and Grounding Guidelines, publication

1770-4.1

Provides in-depth information on grounding and wiring programmable controllers

Resource

Description

Table 1 - Terms and Definitions

Abbreviation

Full Term

Definition

1oo2

One Out of Two

Refers to the behavioral design of a multi-processor safety system.

CIP

Common Industrial Protocol

A communication protocol designed for industrial automation applications.

CIP Safety

Common Industrial Protocol – Safety Certified

SIL 3/PLe rated version of CIP.

DC

Diagnostic Coverage

The ratio of the detected failure rate to the total failure rate.

EN

European Norm.

The official European standard.

GSV

Get System Value

An instruction that retrieves specified controller-status information and places it in a destination tag.

Multicast

The transmission of information from one sender to multiple receivers.

PFD

Probability of Failure on Demand

The average probability of a system to fail to perform its design function on demand.

PFH

Probability of Failure per Hour

The probability of a system to have a dangerous failure occur per hour.

PL

Performance Level

ISO 13849-1 safety rating.

RPI

Requested Packet Interval

The expected rate in time for production of data when communicating over a network.

SNN

Safety Network Number

A unique number that identifies a section of a safety network.

SSV

Set System Value

An instruction that sets controller system data.

Standard

An object, task, tag, program, or component in your project that is not a safety-related item.

Unicast

The transmission of information from one sender to one receiver.

This manual is related to the following products: