Lenze 8615E - Manual (Page 14)

12
2.5.1 EC Declaration of Conformity ´95 for the purpose of the EC
Low-Voltage Directive (73/23/EEC)
amended by: CE mark directive (93/68/EEC)
The controllers of the series 8600 were developed, designed, and
manufactured in compliance with the above-mentioned EC directive
under the sole responsibility of
Lenze GmbH & Co KG, Postfach 101352, D-31763
Hameln
The compliance with the DIN VDE 0160 / 5.88 with the
amendments A1 /4.89 and A2 / 10.88 as well as pr DIN EN 50178
classification VDE 0160 / 11.94 was confirmed by awarding the
VDE label of the test laboratory VDE Prüf- und
Zertifizierungsinstitut, Offenbach.
Standards considered:
DIN VDE 0160
5.88
+ A1 / 4.89
+ A2 / 10.88
prDIN EN 50178
Classification
VDE 0160 / 11.94
Electronic equipment for use in electrical power installations
DIN VDE 0100 Standards for the erection of power installations
EN 60529 IP enclosures
IEC 249 / 1 10/86
IEC 249 / 2-15 / 12/89 Material for printed circuits
IEC 326 / 1 10/90
EN 60097 / 9.93 Printed circuits, printed boards
DIN VDE 0110
/1-2 /1/89 /20/ 8/90 Creepage distances and clearances
Hameln, November 27,1995
........................................... ...........................................
(i.V. Langner) (i.V. Tinebor)
Product manager Engineer in charge of
CE