Lenze 8615E - Manual (Page 102)

100
8.3 Display of actual values
Under codes C050 to C054 you can read different actual values.
Code Act. value Display
C050 Output frequency absolute in Hz
C051 Feedback of PI controller with C172 = -0-: related to f
dmax
with C172 = -1-: absolute in Hz
C052 Motor voltage absolute in V
eff
C053 DC bus voltage absolute in V
C054 Motor current absolute in A
eff
8.4 Switch-on display
If you connect the inverter to the mains, the output frequency is
shown as the first display (C050). If you want to set another
information as switch-on display, enter the corresponding code
number under C004.
Code Parameter Meaning Acceptance
C004 xxx Code number for display after mains
connection SH + PRG
8.5 Identification
On the display of the keypad you can see which software version is
loaded in the inverter. For this, select code C099.
If you work with LECOM, you can see the inverter type under C093.