12 diagnostics, 6 system error messages – Lenze EtherCAT Controller-based Automation User Manual
Page 187
Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17
187
12
Diagnostics
12.6
System error messages
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
0x98110087
ETC_E_SOE_ERRORCODE_UNIT_UNCHANGE
The unit cannot be changed.
Is not supported.
0x98110088
ETC_E_SOE_ERRORCODE_UNIT_WR_PROT
The unit is currently write-protected.
Is not supported.
0x98110089
ETC_E_SOE_ERRORCODE_MIN_NOT_EXIST
The minimum input value is not available.
Is not supported.
0x9811008a
ETC_E_SOE_ERRORCODE_MIN_UNDERSIZE
The minimum input value is too small for transmission.
Is not supported.
0x9811008b
ETC_E_SOE_ERRORCODE_MIN_OVERSIZE
The minimum input value is too big for transmission.
Is not supported.
0x9811008c
ETC_E_SOE_ERRORCODE_MIN_UNCHANGE
The minimum input value cannot be changed.
Is not supported.
0x9811008d
ETC_E_SOE_ERRORCODE_MIN_WR_PROT
The minimum input value is currently write-protected.
Is not supported.
0x9811008e
ETC_E_SOE_ERRORCODE_MAX_NOT_EXIST
The maximum input value is not available.
Is not supported.
0x9811008f
ETC_E_SOE_ERRORCODE_MAX_UNDERSIZE
The maximum input value is too small for transmission.
Is not supported.
0x98110090
ETC_E_SOE_ERRORCODE_MAX_OVERSIZE
The maximum input value is too big for transmission.
Is not supported.
0x98110091
ETC_E_SOE_ERRORCODE_MAX_UNCHANGE
The maximum input value cannot be changed.
Is not supported.
0x98110092
ETC_E_SOE_ERRORCODE_MAX_WR_PROT
The maximum input value is currently write-protected.
Is not supported.
0x98110093
ETC_E_SOE_ERRORCODE_DATA_NOT_EXIST
The data element is not available.
Is not supported.
0x98110094
ETC_E_SOE_ERRORCODE_DATA_UNDERSIZE
The data element is too small for transmission.
Is not supported.
0x98110095
ETC_E_SOE_ERRORCODE_DATA_OVERSIZE
The data element is too big for transmission.
Is not supported.
0x98110096
ETC_E_SOE_ERRORCODE_DATA_UNCHANGE
The data element cannot be changed.
Is not supported.
0x98110097
ETC_E_SOE_ERRORCODE_DATA_WR_PROT
The data element is currently write-protected.
Is not supported.
0x98110098
ETC_E_SOE_ERRORCODE_DATA_MIN_LIMIT
The data element is smaller than the minimum input value limit.
Is not supported.
0x98110099
ETC_E_SOE_ERRORCODE_DATA_MAX_LIMIT
The data element exceeds the maximum input value limit.
Is not supported.
0x9811009a
ETC_E_SOE_ERRORCODE_DATA_INCOR
The data element is not correct.
Is not supported.
0x9811009b
ETC_E_SOE_ERRORCODE_PASWD_PROT
The data element is protected by a password.
Is not supported.
0x9811009c
ETC_E_SOE_ERRORCODE_TEMP_UNCHANGE
The data element can currently not be changed (in AT or MDT).
Is not supported.
0x9811009d
ETC_E_SOE_ERRORCODE_INVL_INDIRECT
Invalid/indirect
Is not supported.
0x9811009e
ETC_E_SOE_ERRORCODE_TEMP_UNCHANGE1
The data element can currently not be changed (parameter or OP mode).
Is not supported.
0x9811009f
ETC_E_SOE_ERRORCODE_ALREADY_ACTIVE
The command is already active.
Is not supported.
0x98110100
ETC_E_SOE_ERRORCODE_NOT_INTERRUPT
The command can be interrupted.
Is not supported.
0x98110101
ETC_E_SOE_ERRORCODE_CMD_NOT_AVAIL
The command is not available in this phase.
Is not supported.
0x98110102
ETC_E_SOE_ERRORCODE_CMD_NOT_AVAIL1
The command is not available (invalid parameter)
Is not supported.
0x98110103
ETC_E_SOE_ERRORCODE_DRIVE_NO
The received drive number does not comply with the requested
drive number.
Is not supported.
0x98110104
ETC_E_SOE_ERRORCODE_IDN
The received ID does not comply with the requested ID.
Is not supported.
0x98110105
ETC_E_SOE_ERRORCODE_FRAGMENT_LOST
At least on fragment got lost.
Is not supported.
Error no.
[hex]
Designation
Description