INFICON STM-2XM 2-Channel Rate/Thickness Monitor - Manual (Page 103)

5 - 23
PN
07
4-
61
4-
P1
A
STM-2XM Operating Manual
33 CSID_SYSPLOT Plot type, plot_class 0 - plot_none
No plot, plot disabled
1 - plot_rdev
Rate Deviation, Measured -
desired
2 - plot_rate
Rate, measured rate in plot
units
3 - plot_thick
Thickness, autoscaled
34 CSID_SYSPLOTHSCL Plot horizontal scale time
type h:mm:ss Value 0:00:00 to 9:59:59, used
in intervals rounded up to
nearest 5 seconds modulo
For example, 0:0:0 to 0:0:5
acts like 5 seconds.
0:00:06 to 0:00:10 acts like 10
seconds.
35 CSID_SYSLCDCT LCD contrast Value 10 to 85 sets contrast
voltage, defaults to 70
36 CSID_SYSLCDBT LCD brightness Value 1 to 99 sets backlight
brightness in % of full, default
50
37 CSID_SYSBEEP Beeper ON/OFF 0 - False/BeepOff
1 - True/BeepOn
Defaults off
38 CSID_SYSPROT Protocol
sysprot_class 0 - sysprot_SMDPH
SMDP PROTOCOL @
115,200 BAUD
1 - sysprot_SMDPM
SMDP PROTOCOL @ 38,400
BAUD
2 - sysprot_SMDPL
SMDP PROTOCOL @ 9600
BAUD
3 - sysprot_sycon
SYCON PROTOCOL @ 9600
BAUD
39 CSID_SYSSMDPADR SMDP Address Value 16 to 254
16 defines RS-232
point-to-point,
17 to 254 give RS-485
multidrop network physical
interface at addresses 17 to
254.
NOTE:
Not used in Sycon
protocol.
Table 5-3 E/F command (continued)
# Command Structure Comments Values