SkyTrak 6036 Service Manual - Manual (Page 7)

Section 1. Safety Practices
Model 6036 S\N 9B0499 and Before 1-1
1.1 INTRODUCTION
Practically all SERVICE work involves the need to
drive the forklift. The Owners/Operators Manual,
supplied with each forklift, contains detailed safety
practices relating to driving and operating. These
practices apply to the service technician and
should be read, understood, and practiced.
Prior to performing any service on the forklift,
consideration should be given to factors that may
have an effect upon safety; not only on the me-
chanic, but also the bystanders.
1.2 SIGNAL WORDS
This symbol means “ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED !” The
symbol is used in conjunction with the following
signal words to attract your attention to safety
messages found throughout this manual. The
message that follows the symbol contains impor-
tant information about SAFETY. To avoid injury
and possible death, carefully read and thoroughly
understand each message.
Par. Title Page
1.1 INTRODUCTION 1-1
1.2 SIGNAL WORDS 1-1
1.3 PERSONAL CONSIDERATIONS 1-2
1.4 EQUIPMENT CONSIDERATIONS 1-2
1.5 GENERAL CONSIDERATIONS 1-3
1.6 OPERATIONAL CONSIDERATIONS 1-3
1.7 FINAL WORD 1-4
CONTENTS
SECTION 1
SAFETY PRACTICES
Warning !
The signal word “WARNING” signifies that a
potentially hazardous situation to a person on
or near the forklift exists, which could result in
death or serious injury if the recommended
precautions or practices are not taken.
Caution !
The signal word “Caution” signifies that a
potentially hazardous situation to a person on
or near the forklift exists, which may result in
minor or moderate injury if the recommended
precautions or practices are not taken.
IMPORTANT: The information in this manual does
not replace any safety rules used in your area.
Before operating this forklift, learn the rules and
laws for your area. Make sure the machine has
the correct equipment according to these rules
and laws.
Your safety and the safety of others in the
work area depend on your knowledge of
correct operating procedures for the machine.
Danger !
The signal word “DANGER” signifies that an
imminently hazardous situation to a person
on or near the forklift exists. This danger to
persons is such that it will result in a high
likelihood of death or permanent injury if the
recommended precautions or practices are not
taken.