SkyTrak 6036 Service Manual User Manual

Page 37

Model 6036 S/N 9B0499 and Before

4-1

Section 4.

Operator's Cab

DANGE

Fig. 4.1 Seat

4.2

MECHANICAL HAND
CONTROLS

Mechanical hand controls in the operators cab are
shown in Fig. 4.2.

Fig. 4.2 Mechanical Hand Controls

SECTION 4

OPERATOR'S CAB

SLIDES

SUSPENSION

ADJUST KNOB

FORWARD/

BACKWARD

LEVER

SEAT

BELT

SUSPENSION

UNIT

SEAT

CUSHION

TRAVEL
SELECT

LEVER

RANGE

SELECT

LEVER

STEERING WHEEL

AND STEERING

UNIT

BOOM

CONTROL

LEVER

GRILLE AND FRAME

TILT CONTROL LEVER

LOWER PANEL

OA0071

OA0021A

CONTENTS

Par.

Title

Page

4.1

SEAT

4-1

4.2

MECHANICAL HAND CONTROLS

4-1

4.2.1

Steering Wheel and Steering Unit

4-2

4.2.2

Travel Select and
Range Select Lever

4-2

4.2.3

Boom Control and Grille
and Frame Tilt Joystick

4-4

4.3

MECHANICAL
FOOT CONTROLS

4-5

4.3.1

Service Brake Pedal

4-5

4.3.2

Throttle Pedal and Cable

4-6

4.4

REAR VIEW MIRRORS

4-8

4.4.1

Mirror Head Adjustment

4-8

4.4.2

Mirror Cleaning and Inspection

4-8

4.1

SEAT

The seat, Fig. 4.1, is mounted on an adjustable
suspension unit. The seat assembly consists of a
seat cushion and two slides. One of the slides has
a forward/backward adjustment lever. A seat belt
is attached to the seat.

Adjustment

You can adjust the seat for your weight and height
and position it horizontally and vertically.

Position the seat for your height by simply pulling
up on the seat until the desired level (low, middle,
or high) is attained. To return the seat to the low
level, raise the seat past the high level and allow it
to return to the low level.

Adjust the seat to your weight by turning a suspen-
sion adjust knob on the front of the suspension
unit until you see your weight in kilograms (2.2
pounds per kilogram) on an indicator next to the
knob.

Adjust the horizontal or forward/backward position
of the seat by using the forward/backward lever on
the slide to the left of the seat.

b. Seat Removal

The seat and seat slides may be removed from
the suspension unit and mounting plate by remov-
ing four locknuts and flat washers that attach the
seat slides to the suspension unit.