BNC 1201 - 6 1/2 Digit Digital Multimeter User Manual
Page 95
96
※ Note: The MEM annunciator will be lit while the multimeter stores
readings and be turned off when the specified number of readings is
reached.
Procedures: CONFIG +STORE→
Figure 4-28
To recall the stored readings, use the following steps:
Press RECALL button, and the multimeter will display all the stored
readings starting from the first reading. Use ◁ and ▷ or ▽and △
buttons to move from the first reading to the last reading the meter has
stored. The locations of the buttons are shown with red rectangle frames
in Figure 4-29.
Figure 4-29
Remote Interface Operation
Users can use the following commands from their PC terminals to store