BNC 1201 - 6 1/2 Digit Digital Multimeter User Manual
Page 150
151
100mV, 1V and 10V ranges. With AUTO OFF, the input resistance is fixed at
10MΩ for all ranges.
INPut:IMPedance:AUTO?
Query the input resistance mode. Returns “1”(ON) or “0”(OFF).
ROUTe:TERMinals?
Query the multimeter to determine if the front or rear input terminals are
selected. Returns "FRON" or "REAR"
ROUTe:CLOSe
Set channels which need to be closed.
ROUTe:CLOSe?
Query channels which were closed.
ROUTe:OPEN
Open all channels.
ROUTe:STATe?
Read the state after scanning. The state display is 1 (means the scanner card
was inserted.), or 0 (means it hasn’t been inserted yet.)
ROUTe:SCAN:FUNCtion
“FREQuency”|“RESistance”|“FRESistance”|“NONE”}
Set scanner card’s measurement functions which might be for the VAC, VDC,
Frequency, 2-Wire Resistance, 4-Wire Resistance or disabling the channel.
ROUTe:SCAN:FUNC?
Query the channel’s function on the scanner card.
ROUTe:SCAN:TIMER?
Read the time interval of scanning.
ROUTe:SCAN:TIMER
Set the time interval of scanning