beautypg.com

1771-alx) configuration plug – Rockwell Automation 1785-Lxxx Enhanced and Ethernet PLC-5 Programmable Controllers User Manual

Page 348

background image

Publication 1785-UM012D-EN-P - July 2005

E-10 Switch Setting Reference

(1771-ALX) Configuration Plug

Configuration Plug

17341

Do not place a jumper
on this set of pins.

1. Lay the module on its right side.

The configuration plugs are visible on the lower
rear of the module.

2. Set the configuration plug as shown below
according to your application.

If You are Using

But Not

Set Configuration Plug

32-point I/O modules and
any address method

1771-IX or 1771-IY

on the 2 lower pins

1771-IX and 1771-IY
modules and any
addressing method

32-point I/O modules

on the 2 upper pins