beautypg.com

Rockwell Automation 1785-Lxxx Enhanced and Ethernet PLC-5 Programmable Controllers User Manual

Page 184

background image

Publication 1785-UM012D-EN-P - July 2005

11-10 Communicating with Devices on an Ethernet Network

In most cases, you can leave the broadcast address at the default setting.

Configure this Field

By Doing the Following

Broadcast Address

Cursor to the field, and enter an address of the following
form:

a.b.c.dWhere: a, b, c, d are between 0-255 (decimal)

If you change the default and need to reset it, type 0.0.0.0.