Sharp MX-M264N - Manual (Page 728)

7-96
SYSTEM SETTINGS
Contents
Storing/Calling of System Settings
The current system settings can be stored, previously stored system settings can be retrieved, and the factory default
system settings can be restored. Touch the [Storing/Calling of System Settings] key to configure the settings.
Restore Factory Defaults
This is used to return the system settings to the factory
default settings. If you wish to create a record of the
current settings before restoring the factory default
settings, print the current settings using "
List Print
(Administrator) " (page 7-89) in the system settings
(administrator).
Store Current Configuration
This is used to store the currently configured system
settings. The stored settings will be retained even if the
[POWER] key (
) is turned off. To retrieve the stored
settings, use " Restore Configuration " below.
Items not stored
• Network Settings: These are not stored as unexpected
settings may cause damage to the
network.
• Product Keys: Product Keys are not stored as
reissue of keys may be necessary.
Restore Configuration
Use this to restore settings stored with " Store Current
Configuration ".
The current settings will change to the retrieved settings.
When settings are changed, the changes will take
effect after the machine is restarted. To restart the
machine see "
TURNING THE POWER ON AND OFF "
(page 1-14) in "1. BEFORE USING THE MACHINE ".