Sharp MX-M264N - Manual (Page 502)

5-54
SCANNER/INTERNET FAX
Contents
AUTOMATICALLY SCANNING BOTH SIDES OF AN
ORIGINAL (2-Sided Original)
The automatic document feeder can be used to automatically scan both sides of an original.
1
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Original] key.
IMAGE SETTINGS (page 5-53)
2
Specify the binding style of the 2-sided
original (book or tablet) and the
orientation in which the original is placed.
(1) Touch the [2-Sided Booklet] key or the
[2-Sided Tablet] key.
A book and a tablet are bound as shown below.
When a document cover is installed the [2-Sided Booklet]
key and the [2-Sided Tablet] key are not displayed.
(2) Touch the appropriate [Image Orientation] key.
If this setting is not correct, a suitable image may not be
transmitted.
(3) Touch the [OK] key.
To cancel 2-sided scanning, touch the highlighted key so that it is no longer highlighted.
2-sided scanning automatically turns off after the transmission operation is completed.
2-sided original Front and reverse sides are scanned
Scan transmission
Scan/Original OK
Auto Auto A4
Scan Size
2-Sided
Tablet 2-Sided
Booklet
Send Size 100%
Image Orientation
(1) (2)
(3)
A
C
E
G
A B
E F
J
L
K L
Book Tablet