Sharp MX-M264N - Manual (Page 675)

7-43
SYSTEM SETTINGS
Contents
Enable/Disable Settings
Item Factory default setting Page
P Enable/Disable Settings
7-91
N Printer Condition Settings 7-91
X (When the hard disk drive is installed) Disabled 7-91
N User Control 7-91
X Disabling of Printing by Invalid User Disabled 7-91
N Operation Settings 7-91
X Cancel Auto Clear Timer Disabled 7-91
X Disabling of Job Priority Operation Disabled 7-91
X Disabling of Bypass Printing Disabled 7-91
X Disable Auto Key Repeat Disabled 7-91
X Disabling of Clock Adjustment Disabled 7-91
X Disabling of Covers/Inserts Mode * 1 Disabled 7-91
N Device Control 7-91
X Disabling of Document Feeder * 1 Disabled 7-91
X Disabling of Duplex Disabled 7-91
X Disabling of Optional Paper Drawer * 2 Disabled 7-91
X Disabling of Tray Setting Disabled 7-91
X Disabling of Finisher * 3 Disabled 7-91
X Disabling of Offset Disabled 7-91
X Disabling of Stapler * 3 Disabled 7-91
X Disabling of Master Machine Mode Disabled 7-92
X Disabling of Slave Machine Mode Disabled 7-92
N Copy Function Settings 7-92
X Disabling Deletion of Job Programs Disabled 7-92
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-92
X Disabling of Auto Paper Selection Disabled 7-92
N Printer Settings 7-92
X Prohibit Notice Page Printing Enabled 7-92
X Prohibit Test Page Printing Disabled 7-92
X Exclude Bypass-Tray from Auto Paper Select Disabled 7-92
X Disabling of USB Memory Direct Print * 4 Disabled 7-92
X Disabling of Network Folder Direct Print * 4 Disabled 7-92